Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Manage buildings

*Only for

Status
colourPurple
titleAdmin
Status
colourBlue
titleEditor

From the sidebar, click (blue star) to access Management and select [Buildings] tab. You can overview the whole building on the list and go into the building overview page.

...

Building floor page

...

Add a survey to floors

*Only for

Status
colourPurple
titleAdmin
Status
colourBlue
titleEditor

...

Add new survey
  1. Select a building on the building list and go into the building overview page.

  2. On the right side of a floor, click(blue star).

  3. Put the name of the survey and click [Add].

  4. You can upload multiple surveys within a single day.

Note: The default name of a survey is the date [yyyy-mm-dd].

...


Edit building information

*Only for

Status
colourPurple
titleAdmin

...

Edit building information
  1. Select a building on the building list and go into the building overview page.

  2. Click (blue star) to edit building information. 

  3. On ① Profile, you can changebuilding’sname, address, contact, website, thumbnail. You can either enter the address or locate the red pin on the map at the address. Click [Save] to update the changes.

  4. Select ② Details and change building’sphoto and information of building/facility. Click [Save] to save changes.

  5. Select ③ Section to upload the section image (if available) and/or edit floors. Click [Save].

...

Note

Caution: Only a Master can delete Admin and Editor users will not see the delete button.

...


Restore Surveys

*Only for

Status
colourPurple
titleAdmin
Status
colourBlue
titleEditor

Go to [Trash] tab to manage deleted surveys. Admin and Editor users can only view and manage deleted surveys.

...

Note

Caution: If you select Delete forever, the deleted content cannot be restored

...

Add new floor in building

*Only for

Status
colourPurple
titleAdmin

...

Edit floor
  1. Click [ + Add floor ] to add the new floor in the building.

  2. Click [ (blue star) ] to move the floor between floors to match the right level according to section image.

  3. Click the interlayer between floors to adjust the floor height to match the section image.

  4. When you delete a floor, hover over the floor and click [(blue star)] appears on the right side.

  5. Click [Save] to save the changes.

...