Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

You can edit the points of the surveys after uploading them to the INSITE cloud.

Adding points

You can add the points by uploading the images.

Add new image/Adding points
  1. Click [+ Add scene] and select new 360 images.

  2. Click [Upload all] to import 360 images into the survey.

  3. Drag and drop the new images onto the floor plan.

Editing Points

Editing Points
  1. Drag a point and drop where you want to relocate on the minimap screen.

  2. Click [Save] to save the changes.

Tip: You can also relocate more than one point at once. 

  1. Select all the points you want to relocate by dragging.

  2. A pink dotted box will appear that covers the points.

  3. Move the box with dragging.

Connect/disconnect points

 

Connect/disconnect point
  1. Select a point that you want to edit connections on the minimap screen.

  2. Right-click on another point that you want to change the connection settings with the highlighted point. 

  3. Click [Connect/Disconnect] to edit the point connection.

Tip: When a point is connected to multiple points, you can disconnect all connections by selecting [Disconnect All]. 

Edit point angle 

Edit point angle
  1. Click and drag the 360 image to move around the red radar of point on the minimap.

  2. Use the Control bar to move the points on the 360 image.

  3. Click [Save] to save the changes.

Note: You can enter the angle directly to control the position of points.

Delete points

  1. Right-click on point to delete.

  2. Click [Remove] to delete points.


3D Builder

Note: Even if a point is removed from the minimap, the 360 image of that point still remains on the list.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.