Preset
Before starting, you need to determine settings for the capture. You can either select from the default preset or customize it yourself.
To customize the settings, follow the steps below:
Step 1. Select the shooting mode.
Mode 1 - Auto Mode
In Auto Mode, the camera automatically counts down to capture, so that you don’t need to tap on every instance. The countdown will start only when the camera is still.
Mode 2 - Manual Mode
For Manual mode, you can capture a point any time you want during the survey.
Step 2. Set the camera height for the 360 camera.
The camera height should cover the distance from the camera lens to the ground. By setting the correct height, the survey and scaling can be processed with more accuracy.
We recommend the height between 1.9m to 2.1m for capturing large space.
Step 3. Set the interval distance between two capture points.
The interval distance will be a guide of when and where to capture on-site. If you go further than this safe distance, you will get the alarm from the app.
We recommend 2m to 2.5m for natural exploring of the survey.
Step 4. Set the countdown for the auto mode shooting.
The app will automatically prompt to capture after the designated countdown.
Note: All the customized settings can be saved as presets in the app by clicking [Save as Preset].