Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

[E] Manage buildings

From the sidebar, click (blue star) to access Management and select [Buildings] tab. You can overview the whole building on the list and go into the building overview page.

Building floor page

[E] Add a survey to floors

Add new survey

  1. Select a building on the building list and go into the building overview page.

  2. On the right side of a floor, click(blue star).

  3. Put the name of the survey and click [Add].

  4. You can upload multiple surveys within a single day.

Note: The default name of a survey is the date [yyyy-mm-dd].


[A] Edit building information

Edit building information

  1. Select a building on the building list and go into the building overview page.

  2. Click (blue star) to edit building information. 

  3. On ① Profile, you can change building’s name, address, contact, website, thumbnail. You can either enter the address or locate the red pin on the map at the address. Click [Save] to update the changes.

  4. Select ② Details and change building’s photo and information of building/facility. Click [Save] to save changes.

  5. Select ③ Section to upload the section image (if available) and/or edit floors. Click [Save].

Note: The section view will only be available if the building has a section image uploaded from the editor. If it is not available, the user will be taken directly to the floor plan view.

Caution: Only a Master can delete Admin and Editor users will not see the delete button.


[E] Restore Surveys

Go to [Trash] tab to manage deleted surveys. Admin and Editor users can only view and manage deleted surveys.

Deleted Surveys and Buildings

  1. View the list of deleted surveys and buildings from each tab.

  2. Click [ (blue star) ] to Restore or Delete forever to change the status of the deleted survey.

Caution: If you select Delete forever, the deleted content cannot be restored. 

[A] Add new floor in building

Edit floor

  1. Click [ + Add floor ] to add the new floor in the building.

  2. Click [ (blue star) ] to move the floor between floors to match the right level according to section image.

  3. Click the interlayer between floors to adjust the floor height to match the section image.

  4. When you delete a floor, hover over the floor and click [(blue star)] appears on the right side.

  5. Click [Save] to save the changes.

  • No labels