Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Camera and ceiling height

Set heights

  1. Click [Settings] on the image view.

  2. Enter the Camera height and click [Apply]. 

  3. Enter the Ceiling height of the site where the survey was taken. 

  4. If you don’t know the height, click [Not sure? Measure from the 360 image]. On the 360 image screen, click on the edge where the floor and wall meet. Then click again on the ceiling following the white circle on top as a base. 

  5. Click [Save] and apply the height to the survey.

Note: If you uploaded the survey from 3i INSITE app, the camera height is already saved as you have preset in the app.

Caution: After applying the camera height and ceiling height, the survey itself also should be saved for updating.

  • No labels